COUNCIL TOOL 3.5# Classic Jersey Pattern SB Axe w/ 36" curved handle (35JC36C)

COUNCIL TOOL 3.5# Classic Jersey Pattern SB Axe w/ 36″ curved handle (35JC36C)

3.5 lb. Jersey pattern single bit axe with phantom bevels and a 36? curved handle. This shape features lugs or ears that increase the surface contact area with the handle. A full-sized felling axe for general axe chores. Phantom bevels or hallows are designed to reduce sticking and burst wood chips.

• 3.5 lb. Jersey pattern single bit axe with phantom bevels and a 36″ curved handle
• Hand sharpened, tapered bit for cutting and splitting
• Head coated with red enamel and cutting edges in clear lacquer to deter rust
• 36″ curved American hickory handle. Eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening
• Axe head is hydraulically seated onto handle and secured with a serrated aluminum wedge
• The serrated shape improves bite and the aluminum choice of material is strong, lightweight and does not change size with moisture content
• The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/2″ of the overall length of the handle is removed during assembly
• ANSI Standards call for bit hardness of Rc 45-60, at least 1/2 inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55 and Council Tool’s target 1-1/4 inches from the cutting edge
• Phantom bevels or hallows are designed to reduce sticking and burst wood chips
• Forged tool steel head. Made in USA